Submersible water pumps are important for many applications, from draining basements to flooding to providing irrigation in gardens. However, these pumps can have problems that require repair. If you’re having trouble with your submersible pump, this step-by-step guide will help you identify and troubleshoot common problems. At HomefixitUAE, we offer professional plumbing services near Dubai and water pump repair in Dubai for those who need expert help.
Safety First
Ensure safety before starting the repair process. Turn off the power to the pump and wait for the water to drain. Always wear appropriate safety equipment such as gloves and goggles to protect yourself from accidents.
Identify the problem
Common problems with submersible pumps include:
The pump won’t turn on:
Check that the power is working. Check the power switch and make sure it is not turned off.
Overheating:
This happens because the pump is dry. Drink plenty of water.
Low water pressure:
due to clogged filters or gaskets.
Abnormal sounds:
A humming or buzzing sound can indicate worn-out cartridges or debris in the pump.
Identifying the problem is key to getting it right.
Disassemble the pump
Once you’ve found the problem, you can disassemble the pump to access the internal components. Use appropriate tools such as screws and pliers to remove the outer cover. Be careful with the placement of the pieces, as you will need to put them together later.
Inspect Internal Parts
While disassembling the pump, inspect the following parts:
Impeller:
Inspect for damage or wear. Clear the debris and make sure it goes away.
Engine:
Check the engine for signs of burns or rust. If the motor is faulty, you may need to replace it.
Seals and gaskets:
Check for signs of wear or leaks. Replace damaged seals to prevent water from entering the engine.
Watch Video: Click Here
Clean the parts
Clean all the internal parts with a soft cloth and a mild detergent. Remove any dirt, debris, or sediment that may have accumulated. Proper cleaning will keep the pump working properly after installation.
Replace damaged parts
If you find damaged parts such as impellers or seals, replace them with new parts. Make sure the replacement parts are compatible with your pump model. You can often find these parts at your local hardware store or online.
Assemble the pump
After cleaning and replacing damaged parts, carefully reassemble the pump in the reverse order of disassembly. Make sure all bolts and nuts are tight to prevent damage.
Test the pump
After assembly, reconnect the power and test the pump. Monitoring operations to ensure they are performing as they should. If the pump won’t start or continues to show problems, there may be a deeper problem that needs professional help.
Conclusion
Submersible pump repair is an easy task if you follow these steps. However, if you don’t want to make these adjustments, or if the problem persists, it’s best to seek professional help. We at HomefixitUAE are experts in sump pump repair and offer reliable water pump repair in Dubai. Our plumbers are ready to help you and make sure your pump is running smoothly. Do not hesitate to contact expert services!
